LZ Low Impedance
n Low impedance with temperature range -55℃ to +105℃ and load life of 1000~2000 hours.
u Specifications
Items | Performance Characteristics |
Operating Temperature Range | -55～+105℃ |
Voltage Range | 6.3～50V |
Capacitance Range | 1～4700μF |
Capacitance Tolerance | ±20% at 120 Hz, 20℃ |
Leakage Current | For Φ4～Φ10, after 2 minutes’ application of rated voltage, leakage current is not more than 0.01CV or 3(μA), whichever is greater. For Φ12.5～Φ16, after 1 minute’s application of rated voltage, leakage current is not more than 0.03CV or 4(μA), whichever is greater. |
Tan δ | Measurement frequency: 120Hz, Temperature: 20℃ Rated voltage(V.DC) 6.31016253550Tanδ(max)Φ4～Φ100.220.190.160.140.120.12Φ12.5～Φ160.260.220.180.160.140.12
|
Stability at Low Temperature | Measurement frequency: 120Hz Rated voltage(V.DC) 6.31016253550Impedance ratioZT/Z20 (max)Φ4～Φ10Z(-25℃)/Z(20℃)222222Z(-55℃)/Z(20℃)544333Φ12.5～Φ16Z(-25℃)/Z(20℃)322222Z(-55℃)/Z(20℃)1086433 |
Load Life | After 2000 hours’ (1000 hours’ for Φ4～Φ6.3x5.4) application of rated voltage at 105℃, capacitors meet the characteristics requirements listed at right. | Capacitance ChangeWithin ±20% of the initial valueTanδ200% or less of the initial specified valueLeakage CurrentInitial specified value or less
|
Shelf Life | After leaving capacitors under no load at 105℃ for 1000 hours, they meet the specified value for load life characteristics listed above. |
Resistance to Soldering Heat | After reflow soldering and restored at room temperature, they meet the characteristics requirements listed at right. | Capacitance ChangeWithin ±10% of the initial valueTanδInitial specified value or lessLeakage CurrentInitial specified value or less
|
Applicable Standards | JIS C-5141 and JIS C-5102 |
u Dimensions & Marking
*1 Voltage mark [6V] represents 6.3V for Ф4～Ф10; *2 [L±0.3] is applicable to Φ6.3×7.7 and Φ8×6.2;
*3 [L±0.5] is applicable to Φ8×10.5～Ф10; *4 [L±1.0] is applicable to Φ12.5～Ф16.
Re: Date code and series type — 1st digit for Year; 2nd digit for Quarter, 4 quarter codes in one year are 1, 4, 7, O;
3rd character for Series; LZ Series = L.
| （mm） |
D×L | Φ4×5.4 | Φ5×5.4 | Φ6.3×5.4 | Φ6.3×7.7 | Φ8×6.2 | Φ8×10.5 | Φ10×10.5 | Φ10×13.5 | Φ12.5×13.5 | Φ12.5×16 | Φ16×16.5 |
A | 1.8 | 2.1 | 2.4 | 2.4 | 3.3 | 2.9 | 3.2 | 3.2 | 4.7 | 4.7 | 5.5 |
B | 4.3 | 5.3 | 6.6 | 6.6 | 8.3 | 8.3 | 10.3 | 10.3 | 13.0 | 13.0 | 17.0 |
C | 4.3 | 5.3 | 6.6 | 6.6 | 8.3 | 8.3 | 10.3 | 10.3 | 13.0 | 13.0 | 17.0 |
E ± 0.2 | 1.0 | 1.3 | 2.2 | 2.2 | 2.2 | 3.1 | 4.4 | 4.4 | 4.4 | 4.4 | 6.7 |
L | 5.4 | 5.4 | 5.4 | 7.7 | 6.2 | 10.5 | 10.5 | 13.5 | 13.5 | 16.0 | 16.5 |
u Standard size & Maximum permissible ripple current & Impedance
WV Cap. (μF) | 6.3 | 10 | 16 |
0J | 1A | 1C |
10 | 100 | | | | | | | 4×5.4 | 3.0 | 60 |
15 | 150 | | | | | | | 5×5.4 (4×5.4) | 1.8 (3.0) | 95 (60) |
22 | 220 | 4×5.4 | 3.0 | 60 | 5×5.4 (4×5.4) | 1.8 (3.0) | 95 (60) | 5×5.4 (4×5.4) | 1.8 (3.0) | 95 (60) |
33 | 330 | 5×5.4 (4×5.4) | 1.8 (3.0) | 95 (60) | 5×5.4 (4×5.4) | 1.8 (3.0) | 95 (60) | 6.3×5.4 (5×5.4) | 1.0 (1.8) | 140 (95) |
47 | 470 | 5×5.4 (4×5.4) | 1.8 (3.0) | 95 (60) | 6.3×5.4 (5×5.4) | 1.0 (1.8) | 140 (95) | 6.3×5.4 (5×5.4) | 1.0 (1.8) | 140 (95) |
68 | 680 | 6.3×5.4 (5×5.4) | 1.0 (1.8) | 140 (95) | 6.3×5.4 | 1.0 | 140 | 6.3×7.7 (6.3×5.4) (8×6.2) | 0.6 (1.0) (0.6) | 230 (140) (230) |
100 | 101 | 6.3×5.4 (5×5.4) | 1.0 (1.8) | 140 (95) | 6.3×7.7 (6.3×5.4) (8×6.2) | 0.6 (1.0) (0.6) | 230 (140) (230) | 6.3×7.7 (6.3×5.4) (8×6.2) | 0.6 (1.0) (0.6) | 230 (140) (230) |
150 | 151 | 6.3×7.7 (6.3×5.4) | 0.6 (1.0) | 230 (140) | 6.3×7.7 (6.3×5.4) (8×6.2) | 0.6 (1.0) (0.6) | 230 (140) (230) | 6.3×7.7 | 0.6 | 230 |
220 | 221 | 6.3×7.7 (6.3×5.4) (8×6.2) | 0.6 (1.0) (0.6) | 230 (140) (230) | 6.3×7.7 (8×6.2) | 0.6 (0.6) | 230 (230) | 8×10.5 (6.3×7.7) (8×6.2) | 0.3 (0.6) (0.6) | 450 (230) (230) |
330 | 331 | 6.3×7.7 (8×6.2) | 0.6 (0.6) | 230 (230) | 10x10.5 (8×10.5) | 0.15 (0.30) | 670 (450) | 10×10.5 (8×10.5) | 0.15 (0.30) | 670 (450) |
470 | 471 | 8×10.5 | 0.30 | 450 | 10x10.5 (8×10.5) | 0.15 (0.30) | 670 (450) | 10×10.5 (8×10.5) | 0.15 (0.30) | 670 (450) |
680 | 681 | 8×10.5 | 0.30 | 450 | 10×10.5 | 0.15 | 670 | 10×10.5 | 0.15 | 670 |
1000 | 102 | 10×10.5 (8×10.5) | 0.15 (0.30) | 670 (450) | 10×10.5 | 0.15 | 670 | 10×13.5 (10×10.5) | 0.13 (0.15) | 750 (670) |
1500 | 152 | 10×13.5 (10×10.5) | 0.13 (0.15) | 750 (670) | 12.5×13.5 (10×13.5) | 0.11 (0.13) | 820 (750) | 12.5×13.5 | 0.11 | 820 |
2200 | 222 | 12.5×13.5 (10×13.5) | 0.11 (0.13) | 820 (750) | 12.5×16 | 0.09 | 950 | 16×16.5 (12.5×16) | 0.08 (0.09) | 1260 (950) |
3300 | 332 | 12.5×16 (12.5×13.5) | 0.09 (0.11) | 950 (820) | 16×16.5 | 0.08 | 1260 | 16x16.5 | 0.08 | 1260 |
4700 | 472 | 16×16.5 | 0.08 | 1260 | 16×16.5 | 0.08 | 1260 | Case Size | Impedance | Ripple Current |
Maximum Impedance (Ω) at 20℃ 100kHz, Ripple Current (mA rms) at 105℃ 100kHz
u Standard size & Maximum permissible ripple current & Impedance
WV Cap. (μF) | 25 | 35 | 50 |
1E | 1V | 1H |
1 | 010 | | | | 4×5.4 | 3.0 | 60 | 4×5.4 | 5.0 | 30 |
1.5 | 1R5 | | | | 4×5.4 | 3.0 | 60 | 4×5.4 | 5.0 | 30 |
2.2 | 2R2 | | | | 4×5.4 | 3.0 | 60 | 4×5.4 | 5.0 | 30 |
3.3 | 3R3 | | | | 4×5.4 | 3.0 | 60 | 4×5.4 | 5.0 | 30 |
4.7 | 4R7 | 4×5.4 | 3.0 | 60 | 4×5.4 | 3.0 | 60 | 5×5.4 (4×5.4) | 3.0 (5.0) | 50 (30) |
6.8 | 6R8 | 4×5.4 | 3.0 | 60 | 5×5.4 | 1.8 | 95 | 6.3×5.4 | 2.0 | 70 |
10 | 100 | 5×5.4 (4×5.4) | 1.8 (3.0) | 95 (60) | 5×5.4 (4×5.4) | 1.8 (3.0) | 95 (60) | 6.3×5.4 | 2.0 | 70 |
15 | 150 | 5×5.4 | 1.8 | 95 | 5×5.4 | 1.8 | 95 | 6.3×5.4 | 2.0 | 70 |
22 | 220 | 6.3×5.4 (5×5.4) | 1.0 (1.8) | 140 (95) | 6.3×5.4 (5×5.4) | 1.0 (1.8) | 140 (95) | 6.3×7.7 (6.3×5.4) (8×6.2) | 1.0 (2.0) (1.0) | 120 (70) (120) |
33 | 330 | 6.3×5.4 (5×5.4) | 1.0 (1.8) | 140 (95) | 6.3×5.4 (8×6.2) | 1.0 (0.6) | 140 (230) | 6.3×7.7 (8×6.2) | 1.0 | 120 |
47 | 470 | 6.3×7.7 (6.3×5.4) (8×6.2) | 0.6 (1.0) (0.6) | 230 (140) (230) | 6.3×7.7 (6.3×5.4) (8×6.2) | 0.6 (1.0) (0.6) | 230 (140) (230) | 8×10.5 (6.3×7.7) (8×6.2) | 0.6 (1.0) (1.0) | 300 (120) (120) |
68 | 680 | 6.3×7.7 | 0.6 | 230 | 6.3×7.7 | 0.6 | 230 | 8×10.5 | 0.6 | 300 |
100 | 101 | 6.3×7.7 (8×6.2) | 0.6 (0.6) | 230 (230) | 8×10.5 | 0.30 | 450 | 10×10.5 (8×10.5) | 0.30 (0.6) | 500 (300) |
150 | 151 | 8×10.5 (6.3×7.7) | 0.30 (0.6) | 450 (230) | 8×10.5 | 0.30 | 450 | 10×10.5 | 0.30 | 500 |
220 | 221 | 8×10.5 | 0.30 | 450 | 10×10.5 (8×10.5) | 0.15 (0.30) | 670 (450) | 10×13.5 (10×10.5) | 0.25 (0.30) | 580 (500) |
330 | 331 | 10×10.5 (8×10.5) | 0.15 (0.30) | 670 (450) | 10×10.5 | 0.15 | 670 | 16×16.5 (12.5×13.5) (10×13.5) | 0.12 (0.20) (0.25) | 1060 (650) (580) |
470 | 471 | 10×10.5 | 0.15 | 670 | 12.5×13.5 (10×13.5) (10×10.5) | 0.11 (0.13) (0.15) | 820 (750) (670) | 16×16.5 (12.5×16) | 0.12 (0.15) | 1060 (700) |
680 | 681 | 10×13.5 | 0.13 | 750 | 12.5×13.5 (10×13.5) | 0.11 (0.13) | 820 (750) | 16×16.5 | 0.12 | 1060 |
1000 | 102 | 16×16.5 (12.5×13.5) | 0.08 (0.11) | 1260 (820) | 16×16.5 (12.5×16) | 0.08 (0.09) | 1260 (950) | | | |
1500 | 152 | 12.5×16 | 0.09 | 950 | 16×16.5 | 0.08 | 1260 | | | Ripple Current |
2200 | 222 | 16×16.5 | 0.08 | 1260 | | | | Case Size | Impedance |
| | | | | | | | | | | |
Maximum Impedance (Ω) at 20℃ 100kHz, Ripple Current (mA rms) at 105℃ 100kHz
u Frequency Correction Factor of Rated Ripple Current
Frequency Capacitance (μF) | 50Hz | 120Hz | 300Hz | 1kHz | 10kHz~ |
Φ4～Φ10 | 1～68 | 0.35 | 0.50 | 0.64 | 0.83 | 1.00 |
100～2200 | 0.40 | 0.55 | 0.70 | 0.85 | 1.00 |
Φ12.5～Φ16 | ～680 | 0.45 | 0.65 | 0.80 | 0.90 | 1.00 |
1000～4700 | 0.65 | 0.85 | 0.95 | 1.00 | 1.00 |
